会员中心 | English

六角头细牙螺栓 A级和B级 DIN 960 - 1990

选择规格尺寸点击↓

M10

M12

(M14)

M16

(M18)

M20

(M22)

M24

(M27)

M30

(M33)

M36

(M39)

M42

(M45)

M48

(M52)

M56

(M60)

M64

(M68)

M72

(M76)

M80

M90

M100

括号内尺寸为非优选

尺寸单位: mm

德标DIN 960 - 1990 DIN960 960DIN 六角头细牙螺栓 A级和B级

模型下载

扫一扫分享

单重计算公差最小破坏扭矩牌号等级

千件重及价格计算千件重 : kg x 元/kg = 元/千件

默认密度 g/cm³

螺纹规格
d

M10

M12

(M14)

M16

(M18)

M20

(M22)

M24

(M27)

M30

(M33)

M36

(M39)

P	螺距	细牙1
		细牙2
b	L≤125
	125＜L≤200
	L＞200
c	最小值
	最大值
d_a	最大值
d_s	最大值
	A级	最小值
	B级	最小值
d_w	A级	最小值
	B级	最小值
e	A级	最小值
	B级	最小值
k	公称
	A级	最小值
		最大值
	B级	最小值
		最大值
k₁	最小值
r	最小值
s	最大值=公称
	A级	最小值
	B级	最小值

1	1	1.5	1.5	1.5	2	1.5	2	2	2	2	2	3	3
-	1.25	1.25	-	-	1.5	2	1.5	1.5	-	-	-	-	-
22	26	30	34	38	42	46	50	54	60	66	72	78	84
28	32	36	40	44	48	52	56	60	66	72	78	84	90
41	45	49	53	57	61	65	69	73	79	85	91	97	103
0.15	0.15	0.15	0.15	0.2	0.2	0.2	0.2	0.2	0.2	0.2	0.2	0.2	0.3
0.6	0.6	0.6	0.6	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8	1
9.2	11.2	13.7	15.7	17.7	20.2	22.4	24.4	26.4	30.4	33.4	36.4	39.4	42.4
8	10	12	14	16	18	20	22	24	27	30	33	36	39
7.78	9.78	11.73	13.73	15.73	17.73	19.67	21.67	23.67	-	-	-	-	-
7.64	9.64	11.57	13.57	15.57	17.57	19.48	21.48	23.48	26.48	29.48	32.38	35.38	38.38
11.6	15.6	17.4	20.5	22.5	25.3	28.2	30	33.6	-	-	-	-	-
11.4	15.4	17.2	20.1	22	24.8	27.7	29.5	33.2	38	42.7	46.6	51.1	55.9
14.38	18.9	21.1	24.49	26.75	30.14	33.53	35.72	39.98	-	-	-	-	-
14.2	18.72	20.88	23.91	26.17	29.56	32.95	35.03	39.55	45.2	50.85	55.37	60.79	66.44
5.3	6.4	7.5	8.8	10	11.5	12.5	14	15	17	18.7	21	22.5	25
5.15	6.22	7.32	8.62	9.82	11.28	12.28	13.78	14.78	-	-	-	-	-
5.45	6.58	7.68	8.98	10.18	11.72	12.72	14.22	15.22	-	-	-	-	-
5.06	6.11	7.21	8.51	9.71	11.15	12.15	13.65	14.65	16.65	18.28	20.58	22.08	24.58
5.54	6.69	7.79	9.09	10.29	11.85	12.85	14.35	15.35	17.35	19.12	21.42	22.92	25.42
3.54	4.28	5.05	5.96	6.8	7.8	8.5	9.6	10.3	11.7	12.8	14.4	15.5	17.2
0.4	0.4	0.6	0.6	0.6	0.6	0.8	0.8	0.8	1	1	1	1	1
13	17	19	22	24	27	30	32	36	41	46	50	55	60
12.73	16.73	18.67	21.67	23.67	26.67	29.67	31.61	35.38	-	-	-	-	-
12.57	16.57	18.48	21.16	23.16	26.16	29.16	31	35	40	45	49	53.8	58.8

千件钢制重≈kg

螺纹长度b

螺纹规格
d

M42

(M45)

M48

(M52)

M56

(M60)

M64

(M68)

M72

(M76)

M80

M90

M100

P	螺距	细牙1
		细牙2
b	L≤125
	125＜L≤200
	L＞200
c	最小值
	最大值
d_a	最大值
d_s	最大值
	A级	最小值
	B级	最小值
d_w	A级	最小值
	B级	最小值
e	A级	最小值
	B级	最小值
k	公称
	A级	最小值
		最大值
	B级	最小值
		最大值
k₁	最小值
r	最小值
s	最大值=公称
	A级	最小值
	B级	最小值

3	3	3	3	4	4	4	4	4	4	4	4	4
-	-	-	-	-	-	-	-	-	-	-	-	-
90	96	102	-	-	-	-	-	-	-	-	-	-
96	102	108	116	124	132	140	148	158	164	172	192	-
109	115	121	129	137	145	153	161	169	177	185	205	225
0.3	0.3	0.3	0.3	-	-	-	-	-	-	-	-	-
1	1	1	1	1	1	1	1	1	1	2	2	2
45.6	48.6	52.6	56.6	63	67	71	75	79	83	87	97	108
42	45	48	52	56	60	64	68	72	76	80	90	100
-	-	-	-	-	-	-	-	-	-	-	-	-
41.38	44.38	47.38	51.26	55.26	59.26	63.26	67.26	71.26	75.26	79.26	89.13	99.13
-	-	-	-	-	-	-	-	-	-	-	-	-
59.9	64.7	69.4	74.2	78.7	83.4	88.2	92.9	97.7	102.4	107.2	121.1	135.4
-	-	-	-	-	-	-	-	-	-	-	-	-
71.3	76.95	82.6	88.25	93.56	99.21	104.86	110.51	116.16	121.81	127.46	144.08	161.03
26	28	30	33	35	38	40	43	45	48	50	57	63
-	-	-	-	-	-	-	-	-	-	-	-	-
-	-	-	-	-	-	-	-	-	-	-	-	-
25.58	27.58	29.58	32.5	34.5	37.5	39.5	42.5	44.5	47.5	49.5	56.4	62.4
26.42	28.42	30.42	33.5	35.5	38.5	40.5	43.5	45.5	48.5	50.5	57.6	63.6
17.9	19.3	20.9	22.8	24.2	26.2	27.6	29.8	31.2	33.2	34.6	39.5	43.7
1.2	1.2	1.6	1.6	2	2	2	2	2	2	2	2.5	2.5
65	70	75	80	85	90	95	100	105	110	115	130	145
-	-	-	-	-	-	-	-	-	-	-	-	-
63.1	68.1	73.1	78.1	82.8	87.8	92.8	97.8	102.8	107.8	112.8	127.5	142.5

千件钢制重≈kg

螺纹长度b

①,材料：
a)钢，性能等级(材料)：≤M39：5.6,8.8,10.9; 对更大规格：按协议。标准ISO 898-1
b)不锈钢，性能等级(材料)：≤M20：A2-70，A4-70; > M20 ≤M39: A2-50, A4-50; > M39: 按协议。标准DIN 267-11
c)有色金属，性能等级(材料)：按协议。标准DIN 267-18
注：ISO 898-1和DIN 267-11规定的性能等级符号也可用于M39以上的规格，前提是产品具有指定给该符号的所有性能

替代列表

DIN 960 - 1990 DIN EN ISO 8765 - 2011

等效标准

国标 GB	国际 ISO	德标 DIN
GB /T 5785	ISO 8765	DIN EN ISO 8765

以上有部分标准可能为近似等效，如有异议以标准原件为准

技术条件和引用标准

材料

钢

不锈钢

有色金属

通用要求
螺纹	公差
	标准
机械性能	等级
	标准
公差	产品等级
	标准
表面处理	-
	-
表面粗糙度
表面缺陷
验收及包装
备注

DIN 267 part 1
6g^①
DIN 13 part 12,15
≤ M39：5.6，8.8，10.9 ＞M39：按协议	≤ M20：A2-70，A4-70 ＞M20 ≤ M39：A2-50，A4-50 ＞M39：按协议	按协议
ISO 898 part 1	DIN 267 part 11	DIN 267 part 18
A：≤ M24, 且L ≤ 10d或150mm B：＞M24，或L＞10d或150mm
ISO 4759 part 1
不经处理	bright	bright
8.8：blackened （thermally or chemically）电镀 DIN 267 part 9
DIN 267 part 2
DIN 267 part 19
DIN 267 part 5
① Only for screws without surface protection. 6 g makes it possible for normal coating thicknesses to be applied in accordance with DIN 267 part 9, the reference line not being exceeded. Depending on the coating thickness required, a larger fundamental deviation shall be selected than that for the g position. This might, however, impair the resistance to stripping of the bolt / nut assembly.

引用参考

GB /T 1172 - 1999

黑色金属硬度及强度换算值

GB /T 5267.1 - 2002

镀锌、镀镍、镀镉、复合镀等层镀层盐雾腐蚀的防护性能

GB /T 193 - 2003

普通螺纹（一般用途米制螺纹）- 直径与螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

紧固件 - 螺栓、螺钉和螺柱 - 公称长度和螺纹长度 (ISO 888:2012, MOD)

GB /T 12603 - 2005

金属热处理工艺分类及代号

GB /T 3 - 1997

普通螺纹收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

紧固件表面缺陷 - 螺栓、螺钉和螺柱 - 一般要求

GB /T 5779.3 - 2000

紧固件表面缺陷 - 螺栓、螺钉和螺柱 - 特殊要求

注：技术数据仅供参考，请以官方原件为准！

告诉我在“易紧通”看到，将给您优惠

宁波市镇海区贵驷朝阳五金螺钉厂

联系人：方宏良

2881819532 移动电话： 13806639241 电话：0574-86574666

材质：碳钢；规格范围：M5-M24；公称长度：20mm~250mm；表面处理：本色、发黑、镀锌、环保锌、热镀锌、达克罗；等级：4.8~12.9级

[询价]

类似标准及供货信息

1	[国标] GB /T 5785 - 2016	六角头螺栓细牙 A级和B级 Hexagon Head Bolts - Fine Pitch Thread - Product Grades A and B 供应商(5)
2	[国标] GB /T 5785 - 2000	六角头螺栓细牙 A级和B级 Hexagon Head Bolts - Fine Pitch Thread - Product Grades A and B 供应商(5)
3	[国标] GB 5785 - 1986	六角头螺栓 - 细牙 - A级和B级 Hexagon Head Bolts - Fine Pitch Thread - Product Grade A and B 供应商(5)
4	[德标] DIN 961 - 1990	全螺纹六角头细牙螺栓 A级和B级 Hexagon Head Bolts with Fine Pitch Thread - Product Grades A and B 供应商(1)
5	[国际] ISO 8676 - 2022	细牙全螺纹六角头螺栓 A级和B级 Hexagon Head Screws, with Fine Pitch Thread - Product Grades A and B
6	[国际] ISO 8765 - 2022	细牙六角头螺栓 A级和B级 Hexagon Head Bolts with Fine Pitch Thread - Product Grades A and B
7	[国际] ISO 8676 - 2011	六角头螺栓细牙全螺纹 Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and B
8	[国际] ISO 8765 - 2011	细牙六角头螺栓 A级和B级 Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B
9	[国际] ISO 8676 - 1999	细牙六角头螺栓 Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and B
10	[国际] ISO 8765 - 1999	细牙螺纹六角头螺栓.产品等级A和B级 Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B
11	[欧标] EN 28765 - 1992	六角头螺栓细牙产品等级：A级和B级 Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B
12	[欧标] EN 28676 - 1991	六角头螺钉细牙产品等级A和B Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and B
13	[意大利] UNI 5738	细牙六角头螺栓 A级和B级 Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B
14	[法国] NF E 25-151 - 2001	细牙六角头螺钉全螺纹 Hexagon Head Screws with Metric Fine Pitch Thread - Product Grades A and B
15	[法国] NF E 25-152 - 2001	米制细牙螺纹六角头螺栓 Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B
16	[化工] HG /T 20613 (GB5785) - 2009	六角头粗杆半牙螺栓(细牙),产品等级A级和B级 Hexagon Bolts, Fine Thread, Product Grade A and B
17	[台湾] CNS 4320 - 1987	细牙六角头螺栓 Fine Thread Hexagon Head Bolts
18	[台湾] CNS 4321 - 1987	细牙全螺纹六角头螺栓 Hexagon Bolts with Approximately to Head, Fine Thread
19	[俄标] GOST R 50790 - 1995	细牙六角头螺栓 A级和B级 Hexagon Head Bolts with Metric Fine Pitch Thread - Product Grades A and B
20	[俄标] GOST R 50795 - 1995	细牙六角头全螺纹螺栓 A级和B级 Hexagon Head Screws with Metric Fine Pitch Thread - Full Threaded, Product Grades A and B
21	[建筑] JG /T 5057.6 - 1995	建筑机械与设备高强度全螺纹细牙六角头螺栓 Construction Machinery and Equipment - High Strength Bolts with Hexagon Head - Fine Pitch Thread - Full Thread
22	[美标] SAE AS 9283 (B) - 1999 (2015)	六角头螺栓 1900-32 UNJF-3A，最小125 KSI，UNS G87400钢，黑色氧化物，PD柄 Bolt Machine - Hexagon Head, PD Shank, Black Oxide, Steel UNS G87400, 125 KSI Min, 1900-32 UNJF-3A
23	[德标] DIN EN ISO 8676 - 2011	全螺纹六角头细牙螺栓 A级和B级 Hexagon Head Bolts with Fine Pitch Thread - Product Grades A and B 供应商(1)
24	[德标] DIN EN ISO 8765 - 2011	六角头细牙螺栓 A级和B级 Hexagon Head Bolts with Fine Pitch Thread - Product Grades A and B 供应商(1)

六角头细牙螺栓 A级和B级 DIN 960 - 1990

相关材料标准或牌号

技术条件和引用标准

引用参考